Firmware (Server Pure)¶

This page is for Server Pure / Purism Librem Mini users ONLY. This firmware is custom for these devices.

Generally, you do not need to manually flash your device using this guide, as the firmware is now automatically updated on supported devices. Please only use this method if directed by a Start9 Support Technician.

The source code can be viewed on Purism’s firmware git repo. You will need a USB flash drive, formatted FAT32, to flash the firmware to your server.

Caution

USB drive must be formatted with the FAT32 filesystem

1. Download the latest firmware from Purism’s git repository.

2. Copy or move pureboot-librem_mini_v2-basic_usb_autoboot_blob_jail-Release-29.zip file onto your USB drive, then eject the drive and insert it into your (powered down) server. USB 3.0 (blue ports) will be faster.

   Note

   You’ll need a monitor and keyboard plugged into your server for this operation

3. Turn on the server while pressing the ESC key on the keyboard repeatedly until you see the PureBoot Basic Boot Menu screen. Select “Options –>”

   

4. Select “Flash/Update the BIOS”

   

5. Select “Flash the firmware with a new ROM, erase settings”

   

6. The system will ask if you want to proceed flashing the BIOS with a new ROM, select “Yes”

   

7. Choose the file that we downloaded and copied to the USB stick earlier: pureboot-librem_mini_v2-basic_usb_autoboot_blob_jail-Release-29.zip

   

8. Confirm you want to proceed with the flash by selecting “Yes”

   

9. The BIOS will be reflashed with the new firmware. This may take a few minutes. When complete, remove the firmware USB, then select “OK” to complete the process.